[100% Working] High Quality Updated Cisco SWITCH 300-115 Dumps Certification Exam Test Questions Answers With High Quality Video Training

Preparing your Cisco 300-115 dumps? The Implementing Cisco IP Switched Networks (300-115 SWITCH) exam is a 120 minutes (30-40 questions) assessment in pass4itsure that is associated with the CCNP Routing and Switching, CCDP certification. High quality updated Cisco SWITCH 300-115 dumps certification exam test questions answers with high quality video training. Implementing Cisco IP Switched Networks (SWITCH ) exam questions from a renowned institute gives you a big jump. “Implementing Cisco IP Switched Networks” is the exam name of Pass4itsure Cisco 300-115 dumps test which designed to help candidates prepare for and pass the Cisco 300-115 exam. Yes your dream for passing Implementing Cisco IP Switched Networks (SWITCH ) exam in first try is going to be fulfilled by our easy mode SWITCH https://www.pass4itsure.com/300-115.html dumps training material for CCNP Routing and Switching test.

[100% Working Cisco 300-115 Dumps Download From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU

[100% Working Cisco 300-135 Dumps Download From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVjNzVmpXTDBzU00

300-115 dumps

Latest Pass4itsure Cisco 300-115 Dumps Exam Questions and Answers Updated (Januaryr 2018)

Refer to the exhibit.
300-115 dumps

When a network administrator is attempting an SSH connection to the device, in which order does the device check the login credentials?
A. RADIUS server, local username, line password
B. RADIUS server, line password, local username
C. Line password, local username, RADIUS server
D. Line password, RADIUS server, local username
300-115 exam Correct Answer: A
Which database is used to determine the validity of an ARP packet based on a valid IP-to-MAC address binding?
A. DHCP snooping database
B. dynamic ARP database
C. dynamic routing database
D. static ARP database
Correct Answer: A
When you configure private VLANs on a switch, which port type connects the switch to the gateway router?
A. promiscuous
B. community
C. isolated
D. trunked
300-115 dumps Correct Answer: A
Which option is a benefit of using VSS?
A. reduces cost
B. simplifies configuration

C. provides two independent supervisors with two different control planes
D. removes the need for a First Hop Redundancy Protocol
Correct Answer: D
Which VRRP router is responsible for forwarding packets that are sent to the IP addresses of the virtual router?
A. virtual router master
B. virtual router backup
C. virtual router active
D. virtual router standby
300-115 pdf Correct Answer: A
A method of obtaining early feedback on requirements by providing a working model of the expected product before actually building is known as:
A. Benchmarking.
B. Context diagrams.
C. Brainstorming.
D. Prototyping.
Correct Answer: D
Which stakeholder classification model groups stakeholders based on their level of authority and their active involvement in the project?
A. Power/influence grid
B. Power/interest grid
C. Influence/impact grid
D. Salience model
300-115 vce Correct Answer: A
Which Plan Schedule Management tool or technique may involve choosing strategic options to estimate and schedule the project?
A. Facilitation techniques
B. Expert judgment
C. Analytical techniques
D. Variance analysis
Correct Answer: C
Which basic quality tool is most useful when gathering attributes data in an inspection to identify defects?
A. Control charts
B. Pareto diagrams
C. Ishikavva diagrams

D. Checksheets
300-115 exam Correct Answer: D
The process of estimating the type and quantity of material, human resources, equipment, or supplies required to perform each activity is known as:
A. Collect Requirements.
B. Conduct Procurements.
C. Estimate Activity Durations.
D. Estimate Activity Resources.
Correct Answer: D
Which input to the Identify Stakeholders process provides information about internal or external parties related to the project?
A. Procurement documents
B. Communications plan
C. Project charter
D. Stakeholder register
300-115 dumps Correct Answer: C
The Identify Stakeholders process is found in which Process Group?
A. Initiating
B. Monitoring and Controlling
C. Planning
D. Executing
Correct Answer: A
An input to Develop Project Charter is a/an:
A. Business case.
B. Activity list.
C. Project management plan.
D. Cost forecast.
300-115 pdf Correct Answer: A
Which item is a formal proposal to modify any document, deliverable, or baseline?
A. Change request
B. Requirements documentation
C. Scope baseline
D. Risk urgency assessment
Correct Answer: A
Which process determines the risks that may affect the project and documents their characteristics?
A. Control Risks
B. Plan Risk Management
C. Plan Risk Responses
D. Identify Risks
300-115 vce Correct Answer: D
An example of a group decision-ma king technique is:
A. Nominal group technique.
B. Majority.
C. Affinity diagram.
D. Multi-criteria decision analysis.
Correct Answer: B
A risk response strategy in which the project team shifts the impact of a threat, together with ownership of the response, to a third party is called:
A. mitigate
B. accept
C. transfer
D. avoid
300-115 exam Correct Answer: C
An output of the Plan Quality Management process is:
A. A process improvement plan,
B. Quality control measurements.
C. Work performance information,
D. The project management plan.
Correct Answer: A
A project manager should document the escalation path for unresolved project risks in the:
A. Change control plan
B. Stakeholder register
C. Risk log
D. Communications management plan
300-115 dumps Correct Answer: D
Which process in Project Time Management includes reserve analysis as a tool or technique?
A. Estimate Activity Resources
B. Sequence Activities
C. Estimate Activity Durations
D. Develop Schedule

Correct Answer: C
Which risk management strategy seeks to eliminate the uncertainty associated with a particular upside risk by ensuring that the opportunity is realized?
A. Enhance
B. Share
C. Exploit
D. Accept
300-115 pdf Correct Answer: C
Payback period, return on investment, internal rate of return, discounted cash flow, and net present value are all examples of:
A. Expert judgment.
B. Analytical techniques.
C. Earned value management.
D. Group decision-making techniques.
Correct Answer: B
The definition of when and how often the risk management processes will be performed throughout the project life cycle is included in which risk management plan component?
A. Timing
B. Methodology
C. Risk categories
D. Budgeting
300-115 vce Correct Answer: A
When a backward pass is calculated from a schedule constraint that is later than the early finish date that has been calculated during a forward pass calculation, this causes which type of total float?
A. Negative
B. Zero
C. Positive
D. Free
Correct Answer: C
A reward can only be effective if it is:
A. Given immediately after the project is completed.
B. Something that is tangible.
C. Formally given during project performance appraisals.
D. Satisfying a need valued by the individual.
300-115 exam Correct Answer: D
Which tool or technique allows a large number of ideas to be classified into groups for review and  analysis?
A. Nominal group technique
B. Idea/mind mapping
C. Affinity diagram
D. Brainstorming
Correct Answer: C
Using values such as scope, cost, budget, and duration or measures of scale such as size, weight, and complexity from a previous similar project as the basis for estimating the same parameter or measurement for a current project describes which type of estimating?
A. Bottom-up
B. Parametric
C. Analogous
D. Three-point
300-115 dumps Correct Answer: C
Sending letters, memos, reports, emails, and faxes to share information is an example of which type of communication?
A. Direct
B. Interactive
C. Pull
D. Push
Correct Answer: D
Which earned value management (EVM) metric is a measure of the cost efficiency of budgeted resources expressed as a ratio of earned value (EV) to actual cost (AC) and is considered a critical EVM metric?
A. Cost variance (CV)
B. Cost performance index (CPI)
C. Budget at completion (BAC)
D. Variance at completion (VAC)
300-115 pdf Correct Answer: B
Which process involves defining, preparing, and coordinating all subsidiary plans and integrating them into a comprehensive plan?
A. Direct and Manage Project Work
B. Develop Project Management Plan
C. Plan Quality Management
D. Monitor and Control Project Work
Correct Answer: B
Inputs to the Plan Schedule Management process include:
A. Organizational process assets and the project charter

B. Enterprise environmental factors and schedule tools.
C. Time tables and Pareto diagrams.
D. Activity attributes and resource calendars.
300-115 vce Correct Answer: A
A strengths, weaknesses, opportunities, and threats (SWOT) analysis is a tool or technique used in which process?
A. Identify Risks
B. Control Risks
C. Perform Quantitative Risk Analysis
D. Perform Qualitative Risk Analysis
Correct Answer: A
Which Knowledge Area involves identifying the people, groups, or organizations that may be impacted by or impact a project?
A. Project Risk Management
B. Project Human Resource Management
C. Project Scope Management
D. Project Stakeholder Management
300-115 exam Correct Answer: D
Which input to Collect Requirements is used to identify stakeholders who can provide information on requirements?
A. Stakeholder register
B. Scope management plan
C. Stakeholder management plan
D. Project charter
Correct Answer: A
Which process identifies whether the needs of a project can best be met by acquiring products, services, or results outside of the organization?
A. Plan Procurement Management
B. Control Procurements
C. Collect Requirements
D. Plan Cost Management
300-115 dumps Correct Answer: A
Which tool or technique is used to manage change requests and the resulting decisions?
A. Change control tools
B. Expert judgment
C. Delphi technique
D. Change log

Correct Answer: A
The planned work contained in the lowest level of work breakdown structure (WBS) components is known as:
A. Work packages.
B. Accepted deliverables.
C. The WBS dictionary.
D. The scope baseline.
300-115 pdf Correct Answer: A
In which Knowledge Area is the project charter developed?
A. Project Cost Management
B. Project Scope Management
C. Project Time Management
D. Project Integration Management
Correct Answer: D
The ability to influence cost is greatest during which stages of the project?
A. Early
B. Middle
C. Late
D. Completion
300-115 vce Correct Answer: A
Which process involves developing an approximation of the monetary resources needed to complete project activities?
A. Estimate Costs
B. Control Costs
C. Determine Budget
D. Plan Cost Management
Correct Answer: A
Which tool or technique is used in the Develop Project Management Plan process?
A. Pareto diagram
B. Performance reporting
C. SWOT analysis
D. Expert judgment
300-115 exam Correct Answer: D
Lessons learned are created and project resources are released in which Process Group?
A. Planning
B. Executing
C. Closing
D. Initiating
Correct Answer: C
When should quality planning be performed?
A. While developing the project charter
B. In parallel with the other planning processes
C. As part of a detailed risk analysis
D. As a separate step from the other planning processes
300-115 dumps Correct Answer: B
A key benefit of the Manage Communications process is that it enables:
A. The best use of communication methods.
B. An efficient and effective communication flow.
C. Project costs to be reduced.
D. The best use of communication technology.
Correct Answer: B
The ways in which the roles and responsibilities, reporting relationships, and staffing management will be addressed and structured within a project is described in the:
A. Human resource management plan.
B. Activity resource requirements.
C. Personnel assessment tools,
D. Multi-criteria decision analysis.
300-115 pdf Correct Answer: A
The process of identifying and documenting relationships among the project activities is known as:
A. Control Schedule.
B. Sequence Activities.
C. Define Activities.
D. Develop Schedule.
Correct Answer: B
Conditions that are not under the control of the project team that influence, direct, or constrain a project are called:
A. Enterprise environmental factors
B. Work performance reports
C. Organizational process assets
D. Context diagrams

300-115 vce Correct Answer: A
The organization’s perceived balance between risk taking and risk avoidance is reflected in the risk:
A. Responses
B. Appetite
C. Tolerance
D. Attitude
Correct Answer: A
An output of the Manage Stakeholder Engagement process is:
A. change requests
B. enterprise environmental factors
C. the stakeholder management plan
D. the change log
300-115 exam Correct Answer: A
Which process numerically analyzes the effect of identified risks on overall project objectives?
A. Plan Risk Management
B. Plan Risk Responses
C. Perform Quantitative Risk Analysis
D. Perform Qualitative Risk Analysis
Correct Answer: C
An input to the Plan Procurement Management process is:
A. Source selection criteria.
B. Market research.
C. A stakeholder register.
D. A records management system.
300-115 dumps Correct Answer: C
Reserve analysis is a tool and technique used in which process?
A. Plan Risk Management
B. Plan Risk Responses
C. Identify Risks
D. Control Risks
Correct Answer: D

300-115 dumps

The best way of securing your IT future is to get a Cisco 300-115 exam certification. “Implementing Cisco IP Switched Networks”, also known as 300-115 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. These days enterprises ask for Cisco Certification as professionals certified from SWITCH 300-115 dumps test are highly skilled and competent. Pass4itsure Cisco 300-115 dumps exam questions answers are updated (456 Q&As) are verified by experts. The associated certifications of 300-115 dump is CCNP Routing and Switching, CCDP. In order to pass CCNP Routing and Switching https://www.pass4itsure.com/300-115.html dumps new questions, We are providing you the easy and instant Cisco 300-115 dumps pdf & vce product.

Read More Youtube: https://youtu.be/yzZU1yP0zbg