[100% Working] Most Important TSHOOT 300-135 Dumps Exam Question Answers with Accurate Answers on Vimeo

300-135

Pass4itsure 300-135 dumps are constantly kept up-to-dated and upgraded when technological advances and Cisco Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) exam importance strategies change. For this reason, we take great care while preparing our CCNP Routing and Switching exam will definitely lead you to better career prospects.

Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT v2.0)
Updated: Jun 10, 2017
Q&As: 82
Exam Information: https://www.pass4itsure.com/300-135.html

Cisco TSHOOT study material provide you best quality Cisco Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) exam to help you pass the CCNP Routing and Switching and be a Pass4itsure 300-135 dumps TSHOOT certified professional. Have the 100% success guarantee by downloading the 300-135 exam pdf questions online to check the quality of Cisco TSHOOT exam test questions from Pass4itsure.com

300-135

Latest Pass4itsure 300-135 Dumps Exam Questions and Answers Updated (June 2017)#10-20

QUESTION 2
Scenario:
You have been asked by your customer to help resolve issues in their routed network. Their network engineer has deployed HSRP. On closer inspection HSRP
doesn’t appear to be operating properly and it appears there are other network problems as well. You are to provide solutions to all the network problems.

300-135

 300-135

300-135

300-135

300-135

The following debug messages are noticed for HSRP group 2. But still neither R1 nor R2 has identified one of them as standby router. Identify the reason causing
the issue.
Note: only show commands can be used to troubleshoot the ticket.
R1#
‘Mar 26 11:17:39.234: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP 172.16.20.254
‘Mar 26 11:17:40.034: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP 172.16.10.254
R1#
‘Mar 26 11:17:40.364: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP 172.16.10.254
R1#
‘Mar 26 11:17:41.969: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP 172.16.20.254
‘Mar 26 11:17:42.719: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP 172.16.10.254
‘Mar 26 11:17:42.918: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP 172.16.10.254
R1#
‘Mar 26 11:17:44.869: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP 172.16.20.254
‘Mar 26 11:17:45.485: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP 172.16.10.254
‘Mar 26 11:17:45.718: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP 172.16.10.254
R1#
‘Mar 26 11:17:47.439: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP 172.16.20.254
‘Mar 26 11:17:48.252: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP 172.16.10.254
‘Mar 26 11:17:48.322: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP 172.16.10.254
R1#
‘Mar 26 11:17:50.389: HSRP: Et1/0 Grp 2 Hello out 172.16.20.2 Active pri 100 vIP 172.16.20.254
‘Mar 26 11:17:50.735: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP 172.16.10.254
‘Mar 26 11:17:50.921: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active prj 130 vIP 172.16.10.254
R1#
‘Mar 26 11:17:53.089: HSRP: Et1/0 Grp2 Hello out 172.16.20.2 Active pri 100 vIP 172.16.20.254
‘Mar 26 11:17:53.338: HSRP: EtO/0 Grp 1 Hello out 172.16.10.2 Active pri130vlP 172.16.10.254
‘Mar 26 11:17:53.633: HSRP: EtO/0 Grp 1 Hello in 172.16.10.1 Standby pri 100 vIP 172.16.10.254
A. HSRP group priority misconfiguration
B. There is an HSRP authentication misconfiguration
C. There is an HSRP group number mismatch
D. This is not an HSRP issue: this is DHCP issue.
E. The ACL applied to interface is blocking HSRP hello packet exchange
Correct Answer: E
Explanation
Explanation/Reference:
Explanation:
On R1 we see that access list 102 has been applied to the Ethernet 1/0 interface:

300-135

300-135

This access list is blocking all traffic to the 224.0.0.102 IP address, which is the multicast address used by HSRP.

 


QUESTION 3
Scenario:
You have been asked by your customer to help resolve issues in their routed network. Their network engineer has deployed HSRP. On closer inspection HSRP
doesn’t appear to be operating properly and it appears there are other network problems as well. You are to provide solutions to all the network problems

300-135300-135

300-135300-135

300-135

Examine the configuration on R4. The routing table shows no entries for 172.16.10.0/24 and 172.16.20.0/24. Identify which of the following is the issue preventing
route entries being installed on R4 routing table?
A. HSRP issue between R4 and R2
B. This is an OSPF issue between R4 and R2
C. This is a DHCP issue between R4 and R2
D. The distribute-list configured on R4 is blocking route entries
E. The ACL configured on R4 is blocking inbound traffic on the interface connected to R2
Correct Answer: D
Explanation
Explanation/Reference: 300-135
Explanation:
If we look at the configuration on R4 we see that there is a distribute list applied to OSPF, which blocks the 172.16.20.0/24 and 172.16.10.0/24 networks.


QUESTION 4
When troubleshooting an EIGRP connectivity problem, you notice that two connected EIGRP routers are
not becoming EIGRP neighbors. A ping between the two routers was successful. What is the next thing
that should be checked?
A. Verify that the EIGRP hello and hold timers match exactly.
B. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip
EIGRP peer command.
C. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip
EIGRP traffic command.
D. Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router.
Correct Answer: D

 


QUESTION 5
You have 2 NTP servers in your network – 10.1.1.1 and 10.1.1.2. You want to configure a Cisco router to
use 10.1.1.2 as its NTP server before falling back to 10.1.1.1. Which commands will you use to configure
the router?
A. ntp server 10.1.1.1
ntp server 10.1.1.2
B. ntp server 10.1.1.1
ntp server 10.1.1.2 primary
C. ntp server 10.1.1.1
ntp server 10.1.1.2 prefer
D. ntp server 10.1.1.1 fallback
ntp server 10.1.1.2
Correct Answer: C

 


QUESTION 6
What level of logging is enabled on a Router where the following logs are seen?
%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
A. alerts
B. critical
C. errors
D. notifications
Correct Answer: D

 


QUESTION 7
Refer to the shown below.
%LINK-3-UPDOWN: Interface Serial0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up
What statement is correct regarding the output shown in the graphic?
A. These two log messages will not have a severity level. They are not errors but are just informational
messages.
B. The first log message is categorized as a warning message.

C. These messages regarding interface status are normal output and will always be displayed when you
exit config mode.
D. The first log message is an error message with a severity level of 3.
E. The second message would be shown if the logging console warning command had been issued.
Correct Answer: D

CCNP Routing and Switching TSHOOT Pass4itsure 300-135 dumps is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. Fortunately, Pass4itsure  can provide you the most reliable training tool for you.

Pass4itsure provide Pass4itsure 300-135 dumps that include simulation test software, simulation test, practice questions and answers about Cisco certification 300-135 exam. We can provide the best and latest Cisco 300-135 TSHOOT Real Exam Dumps to meet your need. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit https://www.pass4itsure.com/300-135.html